-
-
ADVANCED FEATURES - ClientMatch technology eliminates sticky clients by continuously gathering session performance metrics and utilizing this data to steer mobile devices to the best AP and radio, even as users roam and RF conditions change.
- ARM technology delivers best-in-class RF management, including automatic transmit power and channel control with auto coverage-hole correction.
- Zero-touch provisioning as well as automated firmware upgrades and inventory management with the cloud-based Aruba Activate service.
- Spectrum analyzer remotely scans the 2.4-GHz and 5-GHz radio bands to identify sources of RF interference.
- Security
- With an OpenDNS service subscription, Aruba Instant RAPs delivers integrated web filtering, malware and botnet protection to every device connected to the WLAN
- Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
- SecureJack-capable for secure tunneling of wired Ethernet traffic
- VPN configuration functionality enables the Instant AP to create a single VPN tunnel to an Aruba Mobility Controller in the data center. The Mobility Controller acts solely as a VPN end-point and does not supply the Instant AP with any configuration.
WIRELESS RADIO SPECIFICATIONS - AP type: Dual radio, dual-band 802.11n indoor
- Software-configurable dual radio supports 2.4 GHz and 5 GHz
- 2x2 MIMO with two spatial streams and up to 300 Mbps wireless data rate per radio
-
Supported
frequency
bands
(country-specific
restrictions
apply):
- 2.4000 GHz to 2.4835 GHz
- 5.150 to 5.250 GHz
- 5.250 to 5.350 GHz
- 5.470 to 5.725 GHz
- 5.725 to 5.875 GHz
- Available channels: Managed by Aruba Instant or Mobility Controller, depending upon the configured regulatory domain
-
Supported
radio
technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)
- 802.11n: 2x2 MIMO with two spatial streams
-
Supported
modulation
types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
- Transmit power: Configurable in increments of 0.5 dBm
- Maximum
(aggregate)
transmit
power
(limited by
local
regulatory
requirements):
- 2.4-GHz band: +21 dBm
- 5-GHz band: +21 dBm
- Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems
- Maximum ratio combining (MRC) for improved receiver performance
- Cyclic delay diversity (CDD) for improved downlink RF performance
- Short guard interval for 20-MHz and 40-MHz channels
- Space-Time Block Coding (STBC) for increased range and improved reception
-
Supported
data rates
(Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11n packet aggregation: A-MPDU, A-MSDU
ENCRYPTED VPN THROUGHPUT - Up to 20 Mbps
ANTENNAS - RAP-108: Two RP-SMA connectors for external dual-band antennas
- RAP-109: Four integrated omni-directional antennas for 2x2 MIMO with maximum antenna gain of 5.0 dBi in both 2.4 GHz and 5 GHz. Built-in antennas are optimized for vertical orientation
INTERFACES - Network:
- ENET0 (uplink): One 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
- ENET1-4 (local): One 10/100BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
- One port for DC power connector
- One USB 2.0 port (Type A connector)
- One serial console interface (RJ-45)
- Visual
indicators (LEDs):
- Power/system status
- Ethernet link status (2x)
- Radio status (2x)
- Kensington security slot
- Reset button
-
POWER -
Supported
power
sources:
-
802.3af
(PoE) or
802.3at
(PoE+)
on
uplink
Ethernet
port
Note: When using PoE, the USB port will be enabled only when an 802.3at-compliant source is used - 12 volts from external power adapter (sold separately)
-
802.3af
(PoE) or
802.3at
(PoE+)
on
uplink
Ethernet
port
- Maximum
power
consumption:
- Without USB device connected: 12.5 watts
- With USB device: 15 watts
MOUNTING - Desktop (vertical): Using stand supplied with product
- Wall (vertical): Using optional wall mount accessory
- Ceiling (horizontal, not recommended for RAP-109): Using optional ceiling mount accessories
MECHANICAL -
Dimensions
(unit):
-
Excluding
desk
mount:
- 160 mm (W) x 43 mm (D) x 160 mm (H)
- 6.30¡¨ (W) x 1.69¡¨ (D) x 6.30¡¨ (H)
- With
desk
mount:
- 181 mm (W) x 72 mm (D) x 160 mm (H)
- 7.13¡¨ (W) x 2.83¡¨ (D) x 6.30¡¨ (H)
-
Excluding
desk
mount:
- Weight
(unit):
- Excluding desk mount: 385 g (13.6 oz)
- With desk mount: 460 g (16.2 oz)
-
Dimensions
(shipping)
- 230 mm (W) x 220 mm (D) x 90 mm (H)
- 9.06¡¨ (W) x 8.66¡¨ (D) x 3.5¡¨ (H)
- Weight (shipping): 750 g (1.65 lbs)
ENVIRONMENTAL -
Operating:
- Temperature: 0¢X C to +40¢X C (+32¢X F to +104¢X F)
- Humidity: 5% to 95% non-condensing
- Storage
and
transportation:
- Temperature: -40¢X C to +70¢X C (-40¢X F to +158¢X F)
REGULATORY - FCC/Industry of Canada
- CE Marked
- R&TTE Directive 1995/5/EC
- Low Voltage Directive 72/23/EEC
- EN 300 328
- EN 301 489
- EN 301 893
- UL/IEC/EN 60950
- EN 60601-1-1 and EN 60601-1-2
REGULATORY MODEL NUMBERS - RAP-108: APINR108
- RAP-109: APINR109
CERTIFICATIONS - CB Scheme Safety, cTUVus
- Wi-Fi certified 802.11a/b/g/n
WARRANTY Aruba limited lifetime warranty MINIMUM SOFTWARE VERSION - ArubaOS 6.2.0.0
- Aruba Instant 3.2.0.0
-
Supported
power
sources:
-